WiFi Plug-n-Play Humidity Controller
Inkbird Digital Wi-Fi Humidity Controller, IHC-200-WIFI Dual Outlet Pre-Wired Humidistat for Home Brewing, Fermentation, Breeding, Incubation, Greenhouse, Support Humidifier, Dehumidifier, Fan, iOS&Andriod
Main features

IHC-200-WIFI is an easy-to-use, safe and reliable dual relay output humidity controller. Its play-n-plug designed, dual LED screens enabling more humanized. IHC-200-WIFI can control any 100-265 volt humidifier, dehumidifier or fan.

You can download the Inkbird Pro APP for free, and by connecting to wifi, you can set up and check the status of IHC-200-WIFI devices with your mobile phone,truly realize your smart life.

The maximum electrical load is 10A. It can fit many residential humidifier and dehumidifier. It is widely used for mushroom, mini greenhouse, ventilator fan, crawl space, turtle enclosure, curing chanmber, snake cage, tobacco cage and so on. 

  • Remote Control: Connect the IHC-200 Wi-Fi humidity controller to 2.4GHz Wi-Fi, then you can monitor or adjust the humidity on your phone through the app at any time anywhere.

  • Dual Relay Output: Support both humidifying equipment and dehumidifying equipment. Voltage: 100-230Vac 50/60Hz, 10A. Maximum Power: 1200W(120Vac), 2200W(220Vac). Humidity measurement range: 10 ~ 99% RH. Relative humidity accuracy: ± 3% RH ~ ± 5% RH. 

  • Plug-n-Play: No complicated installation required. Display the set humidity value and the measured humidity value at the same time with 2 screens. Support humidity calibration and dehumidification control delay protection. 

  • High/Low Humidity Alarm: Set a High/Low Humidity Alarm, the controller will alarm to remind you if the humidity value exceeds the setting value, and it also alarm when a probe error occurs. Press any button to turn off the alarm sound or you can turn it off on your phone.
    • Power Input: 100 ~240VAC, 50Hz/60Hz
    • Power OutputMax. 10A, 100V ~240V AC
    • Power Consumption<3W
    • Input Power Cable Length1.5m ( 5ft )
    • Output Power Cable Length30cm ( 1ft )

    Socket (US Version): 85x42x24mm (3.3x1.7x1.0 inch)
    Socket (EU Version): 135x54x40mm (5.3x2.1x1.6 inch)

    Socket (UK Version): 140x51x27mm (5.5x2.0x1.0 inch)

    Socket (AU Version): 112x46x27mm (4.4x1.8x1.0 inch)

    • Net Weight: 350g
    • Gross Weight: 500g
    • Dimension Body: 140x68x33mm (5.5x2.7x1.3inch)
    • Dimension Socket
    • Buzzer Alarm: Alarm High/Low Limit Setting
    • 1x IHC-200 humidity controller; 
    • 1x Manual;
    • 1x Warranty Card.

    Dehumidification (12A, 100-240VAC)
    • Relay Contact Capacity: Humidification (12A, 100-240VAC)
      • Storage Temperature: 0℃~60℃/32℉~140℉
      • Storage Humidity: 20~80%RH(not frozen or dewed)
      • Operating Ambient Temperature: -20℃~40℃/-4℉~104℉

        For support, please visit support center or email us.
        • Warranty: 12 month 
        • Sensor ModelHTG3535CH
        • Sensor Stability<0.5%RH/yr
        • Sensor Length2m / 6.56ft
        • Humidity Measuring Range: 10%-99.99%RH
        • Humidity Control Range: 10%-99%RH
        • Humidity Display Accuracy: 0.1%RH
          • Relative Humidity Accuracy(10% to 95%RH): Typ: ±3%RH,
                                                                                      Max: ±5%RH

        Contact Us
        User Manual