Outlet Thermostat Temperature and Humidity Controller
Inkbird Temperature and Humidity Controller ITC-608T Pre-wired AC Dual Stage Outlet Thermostat with 12 Period Time Stage, 1800w, ETL listed (With Humidity Sensor)
  • Plug and play design, easy to use, can control temperature and humidity at the same time
  • Dual relay output, be able to connect with refrigeration and heating equipment at the same time; be able to connect with humidifier and dehumidifier equipment at the same time; be able to connect with refrigeration/ heating and humidifier/dehumidifier equipment at the same time
  • Support reading with Centigrade or Fahrenheit unit 
  • Maximum output load: 1800W (120V, 15A) 
  • Dual display window, be able to display measured temperature/humidity and set temperature/humidity at the same time
  • Supporting Temperature and humidity calibration 
  • Compressor delay protection for refrigeration control 
  • High and low temperature/humidity alarms are available 
  • Over-temperature/humidity and sensor fault alarm 
  • Heating/Cooling differential function could be set separately for refrigeration and heating to protect temperature controller from violent change. Same as humidity control
  • Support setting 12 different temperatures in 12 different time period
Temperature and humidity controller ITC-608T has certificate of ETL (US and Canada approved).  The product will be much safe when using this unit. ITC-608T has multifunction control mode. It can control both temperature and humidity at the same time. (Plug both temperature and humidity sensor). Or control single temperature and has 12 different time stage periods for temperature control mode. Or only control humidity with plug humidity sensor. This unit supports both F and C degree, compress delay, calibration and reset setting values saving. ITC-608T is a good choice for home brewing, fermenting, Greenhouse, terrarium, reptile, planting, meat storage and cooking. 
Main features
  • Storage Temperature: -20~ 60 ° C / -4~ 140 ° F 
  • Storage environment:temperature:0℃~60℃/32℉~140℉;humidity:20~80%RH(Unfrozen or condensation state )
  • Controller : 2 Years Warranty
  • Sensors:  1 Year
For support, please visit support center or email us.

  • 1x ITC-608T Temperature and Humidity controller; 
  • 1x Humidiy Sensor; (Optional)

  • 1x Temperature Sensor; (Optional)
    • 1x Manual;

    • Relative humidity measurement range:5~99%RH
    • Humidity display accuracy:0.1%RH
    • Unit: %RH

    • 20.8cm*8.5cm*3.5cm(8.19*3.35*1.38in)
    • Maximum output load:120Vac, 60Hz, 15A, 1800W
    • Input Power Cable Length: 1.5m(59.05in)
    • Temperature sensor cable Length: 2m(78.74in)
    • Humidity sensor cable Length: 2m(78.74in​)
    • Temperature Control Range : -40~100 °C / -40~212 ° F 
    • Temperature Display Accuracy: 0.1 ° C / 0.1° F ​(<100 °C/ °F)
    • Ambient Temperature: -20~ 60 ° C / -4~ 140 ° F
    • Unit: Celsius °C or Fahrenheit °F

    User Manual
    Contact Us